Traction Control Light Won’t Turn Off

Have you ever been driving and noticed that your Traction Control Light Won’t Turn Off? Seeing a warning light constantly illuminated on your dashboard can be frustrating and concerning. Traction control is an important safety feature in modern vehicles, designed to help maintain stability and prevent wheel slip during acceleration or when driving on slippery surfaces. When the traction control light stays on, it could indicate a problem with the system or a malfunctioning sensor.

What Does the Traction Control Light Mean?

The traction control light is a warning indicator on your vehicle’s dashboard that alerts you to potential issues with the traction control system. When this light comes on, the system detects a problem and is malfunctioning. It is important to address this issue promptly, as it can affect your vehicle’s safety and performance.

Traction Control Light Won’t Turn Off

These sensors monitor the rotation of each wheel and send signals to the traction control module. If one or more sensors malfunction, it can lead to inaccurate readings and trigger the warning light. Another possible cause could be a problem with the ABS (anti-lock braking system) module, which works with the traction control system.

Here are four potential situations where the traction control light may illuminate:

When starting the car: When you start your vehicle and notice the traction control light illuminating your dashboard, it could be due to various reasons. This system helps to prevent wheel spin by monitoring and controlling wheel speed during acceleration.

The vehicles also have their service engine lights. You can read Service Engine Soon Light – Meaning, Causes & What To Do to gather information about it.

When starting your car, if your vehicle’s tires are not properly inflated. Low tire pressure can affect grip and traction, causing difficulty maintaining control while driving. The traction control system detects this and alerts you through the illuminated light on your dashboard.

Traction Control Light Won’t Turn Off

When there’s a loss of traction, the system engages: Your vehicle’s traction control system automatically engages to help maintain stability and prevent wheel slippage. This essential safety feature utilizes sensors that monitor individual wheel speeds and adjusts power distribution accordingly.

As your tires struggle to maintain grip, the system applies selective braking pressure and reduces engine power to regain traction. This intervention helps prevent skidding or spinning out of control during sudden accelerations or while navigating sharp turns.

When the TCS is manually turned off: Turning off the traction control system (TCS) in your vehicle can be useful in specific situations, such as when driving on rough terrain or in deep snow. When you accelerate too aggressively while the TCS is turned off, the system typically helps prevent wheel slippage. Still, without its assistance, excessive acceleration can cause one or more wheels to lose traction and spin uncontrollably, triggering a warning light on your dashboard.

When your car senses a problem in the system:

When there is a problem with one or more of your vehicle’s wheel speed sensors, these sensors monitor the rotational speed of each wheel and provide crucial data to the TCS. If any of these sensors fail or become damaged, the traction control light can be triggered.

Why Your Traction Control Light Won’t Turn Off

If the light remains illuminated on your dashboard even when driving in normal conditions, it could indicate an underlying problem.

A faulty wheel speed sensor is one common reason for a constantly lit traction control light. These sensors monitor the rotational speed of each wheel and send information to the vehicle’s computer system. If one or more sensors fail or become dirty or damaged, they may not provide accurate readings to the system. The traction control module may interpret this as losing traction and unnecessarily engaging, leading to an illuminated warning light.

Possible Causes Why the Traction Control Light Won’t Turn Off

Here we’ve listed the most common for you:

1. You Have Faulty Wheel Speed Sensors

Sensors are responsible for measuring the speed of each wheel and sending that information to the vehicle’s onboard computer. If one or more of these sensors is malfunctioning or damaged, it can cause the traction control system to interpret data and keep the light illuminated incorrectly. This can happen for various reasons, such as wear and tear, electrical issues, or damage caused by road debris.

When a wheel speed sensor becomes faulty, it may send incorrect readings to the vehicle’s computer, causing it to think that one or more wheels are slipping or losing traction when they aren’t.

2. You Have a Faulty Steering Angle Sensor

This sensor is responsible for detecting the position of your vehicle’s steering wheel and relaying that information to the traction control system.

A faulty steering angle sensor can also affect other systems in your vehicle, such as stability control and anti-lock brakes. When these systems receive inaccurate information about the position of your steering wheel, they may not work properly.

If the TCS light remains on because of a malfunctioning steering angle sensor providing inaccurate readings, it indicates that either the sensor needs to be replaced or reset. A reset would suffice, and you can try recalibrating it by following these instructions:

  • Bring your vehicle to a stop and start the engine. 
  • Align the steering wheel to the center position. 
  • Rotate the steering wheel to the right until it locks, making two complete turns. 
  • Repeat this action in the opposite direction. 
  • Reposition the steering wheel back to its centered position.

3. There’s a Wiring or Electrical Issue

If the light remains on even after bringing your vehicle to a stop and starting the engine, there might be underlying causes that need attention. The wheel speed sensors provide data to the traction control system and help regulate individual wheel speeds during acceleration or when driving in slippery conditions.

Constantly lit traction control light is a problem with the ABS (anti-lock braking system). Since both the ABS and traction control systems work together, any issues with one can affect the other.

4. Faulty ABS module

The ABS (anti-lock braking system) module monitors wheel speed sensors and regulates brake pressure to prevent wheel lock-up during sudden stops or when driving on slippery surfaces.

Traction Control Light Won’t Turn Off

An ABS module can trigger the traction control light as it may fail to communicate properly with other vehicle systems. This can occur due to electrical malfunctions, sensor failures, or internal damage within the module.

5. Driving or Weather Conditions

The traction control light on your dashboard won’t turn off even when driving under normal conditions; it could indicate a potential issue with the system.

This could be a problem with the vehicle’s ABS (anti-lock braking system). The ABS works hand in hand with the traction control system and shares several components, including wheel speed sensors.

Troubleshooting Tips

The persistent traction control light is a faulty wheel speed sensor. These sensors are essential for determining the rotational speed of each wheel, allowing the system to adjust if one or more wheels lose traction. If a sensor becomes damaged or dirty, it may not provide accurate readings to the system, resulting in a constant warning light. Cleaning or replacing the affected sensor should solve this issue.

How To Turn off Traction Control Light After Fixing the Problem

Suppose you’ve recently experienced issues with your car’s traction control system and have successfully resolved the problem. You can follow simple steps to ensure this light is no longer a constant reminder of past troubles. Start by turning off your vehicle’s engine and locating the fuse box. Open the fuse box cover and search for the TCS or Traction Control System fuse. Remove this fuse carefully using a pair of needle-nose pliers.

After removing the TCS fuse, wait at least 5 minutes before reinserting it into its original slot. This waiting period allows any residual electrical charge in the system to dissipate fully.

What to do if You Can’t Fix The Problem Yourself

There are steps you can take to seek assistance and find a solution.

  • Don’t be afraid to ask for help.
  • Whether reaching out to a friend or family member with expertise in the area or contacting professionals such as plumbers or electricians, seeking guidance from others can provide valuable insights and potentially lead to a resolution.
  • If you can’t find anyone to assist, consider utilizing online resources.
  • The internet is filled with forums, tutorials, and troubleshooting guides that cater to almost any issue imaginable.
  • By doing some research online, you may come across step-by-step instructions or advice from others who have encountered similar problems.


If your Traction Control Light Won’t Turn Off, addressing the issue immediately is important. Ignoring the problem could lead to potential safety hazards on the road. Start by checking for any underlying problems with your vehicle’s sensors or wiring. If all seems fine, it may be necessary to visit a professional mechanic who can diagnose and fix the problem for you. Ensuring that your traction control system is functioning properly is crucial for a smooth and safe driving experience. Don’t wait any longer – take action today and get your traction control light turned off for good!

Frequently Asked Questions:

How can I turn off the traction control light manually?

Most vehicles do not have the option to turn off the traction control light manually. It will automatically go off once the underlying issue causing it has been resolved.

What other factors could trigger the traction control light?

Faulty ABS sensors, damaged wheel bearings, worn brake pads, or even a malfunctioning engine sensor can also be potential triggers for the traction control light.

Will disconnecting my battery reset the traction control system?

Disconnecting your battery may temporarily reset various systems in your vehicle, including the traction control system. If there is an underlying issue, it will likely reappear once you start driving again.

Rabia Riaz
Latest posts by Rabia Riaz (see all)